Glow spectrometer GDS8000 GD OES

STS-A200 Specific Protein Analyzer Environmental testing requirements: Meet the requirements of Group I of Climate Environmental Testing, Group I of Mechanical Environmental Testing in GB/T 14710-2009, and Table 3 of this technical requirement. The transportation test and power supply voltage adaptability test of the analyzer should comply with the requirements of Chapter 4 and Chapter 5 of GB/T 14710-2009, respectively. Safety requirements: Meet the requirements of applicable clauses in GB 4793.1-2007, GB 4793.9-2013, and YY0648-2008. Electromagnetic compatibility requirements: comply with the requirements of applicable clauses in GB/T18268.1-2010 and GB/T18268.26-2010.

DR100 Direct Reading Ferrograph Model: DR100 (1) Can quickly measure the content of all ferromagnetic wear particles in oil, and provide quick quantitative analysis for ferromagnetic particles in oil. (2) By utilizing equipment to detect changes in wear intensity at an early stage of wear, and adjusting the sampling monitoring time density, trend analysis can be conducted on the instrument and equipment to further inspect and replace the problem, avoiding serious losses.

RF500 Rotary Particle Depositor Model: RF500 The RF500 dual rotary ferrograph is a new type of equipment operating condition oil analysis instrument, which meets the requirements of NB/T 51068-2017 "Iron spectrum analysis method for gear oil in coal mine oil equipment (rotary ferrograph method)" and Q-SH.J 014-2010 "Technical standard for iron spectrum analysis of coal mine equipment oil".

AU8000 Precious Metal Analyzer Model: AU8000 SooHow - China Instrument configuration 1. Si-PIN semiconductor detector, digital multi-channel analysis system, X-ray tube, high and low voltage power supply; 2. Collimator filter system, sample observation system, electronic control system, computer and printer. This product meets the requirements of the national standard GB/T18043-2013 for instrument resolution. AU8000 uses Si-Pin semiconductor detectors, which are far superior to proportional counting detectors; it accurately analyzes the content of gold, silver, platinum, palladium, copper, zinc and nickel in gold, platinum and K-gold jewelry.