Products

Products

Product portfolio

Furnace Model: SH-FU-11MS(18) 1800℃ high temp muffle furnace (11L) - High-Temperature Furnaces with MoSi2 Rod Heating up to 1800°C - Great for testing metallic sample and sintering - Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments - Recommended ideal running temperature is below 1650℃ *24hours continuous running - Heating from 2 sides and vertical MoSi2 rod preventing warping. Easy replacement - Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer - Double housing and low surface temperature - Ceramic fiber materials which are not classified as carcinogenic - Great temp uniformity (+/-4%) - Prompt heat up and good maintaining - SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃) - Gas atmosphere available with optional flow meter

0765 259 545

Optically clear glass cup for sample presentation of liquids, powders, granules and pellets.

0765 259 545

  • Độ chính xác pH (@ 25ºC / 77ºF) ± 0,2 mV, ± 0,01 pH, ± 0,002 pH
  • Hiệu chỉnh pH lên đến 5 điểm
  • Bộ đệm hiệu chuẩn pH 1.68, 10.01, 12,45, 4,01, 6,86, 7,01, 9,18, hai bộ đệm tùy chỉnh
  • Bù nhiệt độ pH ATC: -5.0 đến 100.0ºC; 23,0 đến 212,0 ° F .

0765 259 545

Endecotts woven wire mesh sieves are the most widely used test sieves for all types of laboratory sampling and particle size analysis. They are madewith only the highest quality materials and are available in diameter sizes of 100, 200, 300, 400 or 450 mm as well as in 8 or 12 inches. Woven wire mesh sieves can be supplied with aperture sizes ranging from 125 mm down to 20 microns in full and half height versions. International Test Sieve Series (ISO) American Standard Test Sieve Series (ASTM) Woven Wire Sieves New 200 mm & 8" stainless steel sieves Product Advantages Precision frame (ensures consistent nestability) Precise aperture (in accordance with ISO 3310-1, ASTM E11 or other specifications) Natural fillet (free flowing of sample) Totally sealed (no crevice to lose material) Evenly tensioned mesh (ensures accurate analysis) Safe edge (big radius makes it comfortable to handle) Serial number (ensures full traceability)

0765 259 545

Test Dish Tightening Device Model: B2260 WVTR B2260 WVTR Test Dish Tightening Device is an auxiliary device to permeability testing instruments, for tightening the test dishes in water vapor transmission rate tests of films, sheets and similar materials used in food, medicine, medical devices, daily chemical, photovoltaic, electronic and many other industries.

0765 259 545

JJNMM Notch Milling Machine Model: JJNMM Manufacturer: JJTest - China Contact for quotation: 0765 259 545 This instrument is an equipment for sample incision processing for the test method of resistance to slow crack growth and slow growth of thermoplastic pipes for fluid transportation. The instrument has a high degree of automation, precise cutting precision, and humanized design, which is convenient for safe use by operators. Standard: GB/T 18476: ISO 13479

0765 259 545

Dry Incubator for milk antibiotic tests Model: ET-W24 Manufacturer: Milkotester - Bulgaria Contact for quotation: 0765 259 545 System for detection of inhibitors and antibiotics in the raw animal milk (block heater) compatible with tests twinsensor , 4sensor, eclipse 50, eclipse 100. Device is suitable for installation in milk collecting centers or milk transportation vehicle. We recommend using of our block heater which is developed to fit the shape and bottom surface of the micro-wells of different kind of antibiotic and inhibitor tests.

0765 259 545

Horizontal Pressure Steam Autoclave Model: ST-H150 Manufacturer: Scitek - China Contact for quote: 0765 259 545 Horizontal Pressure Steam Autoclave Features: Overheat protection: Automatically cutting off heating with audible and visual alarming when the autoclave is overheated. Electric interlock safety: Preventing from starting a cycle if door is not properly locked or from door opening if the chamber is pressurized or the power is disconnected. Door-temperature interlock safety: Preventing from explosion of liquids if the liquids temperature is not cooled down the safe limit (20℃ lower than the local boiling point). Anti-burning protection: Automatically cutting off heating with audible and visual alarming when the autoclave is lack of water. Steam pressure safety valve: Automatically works when the chamber pressure exceeds the limit. Electrical circuit safety device for over-current and shortcut protection. Automatic operation of sterilization (heating, sterilization, steam discharge and drying) can be easily set and monitored by the LCD touch screen. Built-in steam generator prevents the media from contamination. Buzzer for working errors and the end of the cycle. Automatic atmospheric pressure adjustment for the installation and operation in plateau areas. Optional printer, real-time record sterilization process, error and alarm information.

0765 259 545

Benchtop pH Meter, 2 Calibration Points Model: PH-B25C Manufacturer: Scitek - China Contact for quote: 0765 259 545 Benchtop pH Meter Features: Economical benchtop pH meter, 2 point calibration, for routine pH measurements. Functional features: 2 point key calibration, automatic recognition of standard buffers. Optional USA or NIST standard buffer sets. Automatic electrode slope display for prompt replacement of electrodes.

0765 259 545

MICROBIOLOGICAL INCUBATOR Model:BXP-130S Boxun - China The water jacket incubator is a high precision constant temperature equipment. It is applicable for the plant germination, seedling and microorganism cultivation, insects or little animals breeding, BOD mensuration of water quality monitor and other experiments. It is an ideal apparatus for manufacturing, research, education institutes of biologic descendibility project, medicine, agriculture, forestry, environmental science, animal husbandry and aquaculture.

0765 259 545

The port insert is a field-replaceable, snap-in 31.8 mm (1.25”) component with borosilicate glass, masking the sample to a 31.8 mm viewing area and protecting the instrument from particles (45/0 only)

0765 259 545

Introduction: Product Comparison High-End Brand of Domestic Colorimeter NH310 is a mainstream brand colorimeter introduced by 3nh which has synthesized the advantages of ten more traditional imported colorimetersand has experienced ten thousands tests and applied many innovative technologies. Accurate, Stable, Exquisite and Affordable! The Preferred Solution for Color Quality Control Management NH310 high-quality portable colorimeter has adopted multi-channel color sensors of international brands, more stable IC platform as well as efficient and accurate algorithms to provide users with accurate and fast color management and application. NH310 is also designed with ergonomics and humanized operation and it has applied for a number of patents. NH310 is a multifunctional colorimeter with high quality and competitive price. 3nh insists on independent research whose technology innovation is unique in color management field. NH310 is the most convenient colorimeter for users.

0765 259 545

27000303 XS BALANCE model: BL 2002 BASIC - 2000gr. - 0,01

0765 259 545

JJXGR Pipe Creep Ratio Testing Machine Model: JJXGR Manufacturer: JJTest - China Contact for quotation: 0765 259 545 This instrument is mainly used to determine the creep ratio of thermoplastic pipes. The instrument also has a dual-mode measurement and control system for fully mechanical loading and fully electronically controlled loading, which has the characteristics of long-term stability and convenient and flexible operation. Standard: GB/T 18042

0765 259 545

Dry Incubator for milk antibiotic tests Model: BS-W8 Manufacturer: Milkotester - Bulgaria Contact for quotation: 0765 259 545 System for detection of inhibitors and antibiotics in animal milk (block heater) compatible with tests BETA STAR ®. The device is suitable for installation in milk collecting centers or milk transportation vehicles. We recommend using our blockheater which is developed to fit the shape and bottom surface of the micro-wells of different kind of antibiotic and inhibitor tests.

0765 259 545