Xenon arc lamp aging test chamber
Model: GB-OXD-15P
Xenon lamp aging test chamber simulates the full spectrum lamp with Xenon arc lamp to reappear the destructive wave. It serves for the environmental simulation and accelerated test for research and development, product development and quality control. Besides, the chamber also applies to the choice of new material, weathering test after composition of material and improvement for the current material. It simulate different environment, and show the material changes under the explosion of sunlight.
- The chamber meets the standard: GB/T16585-1996 , GB14522-93 ,GB/T16422.3-97, ASTM D2565 and so on. The Chamber is to determine the color fastness, aging resistance of textiles, plastics, coatings, rubber products or other materials by objecting to the simulated conditions of nature weather (sun, rain, temperature and humidity, etc.).
Hach DR300 Handheld Chlorine/Total Chlorine Meter
Model: DR300
Manufacturer: Hach - USA
Used to measure residual chlorine and total chlorine in water
Measurement method: DPD
Provides 2 measuring ranges: 0.02 to 2.00 mg/L Cl2 and 0.1 to 8.0 mg/L Cl2
Absorbance: 0 - 2.5 Abs
Backlit LCD screen is easy to use in low light conditions
IP67, waterproof at 1m for 30 minutes
Kett NIR Moisture Analyzer KJT-130
Model: KJT-130
Manufacturer: Kett
Origin: Japan
Convenient handheld device. Drive with rechargeable battery. Record data and create calibration curves using the operating keys on the main device
KETT NIR MOISTURE ANALYZER KB-30
Model: NIR KB-30
Manufacturer: Kett
Origin: Japan
KB-30 can be successfully connected to a personal computer, making its main part design simple and realizing a low price.
When necessary, you can also use it alone after all the settings have been completed.
KB-30 includes long-life parts of the test unit.
The electric bulb and the wheel motor can be replaced in a short time and are easily accessible.
KB-30 can use both RS-232C and RS-485 external communication with its internal jumper switch.
It can be connected to 15 sensor heads via RS-485.
Tablet Friability Testing
Friabimat SA-400
For the hardest and most robust solid dosage forms which fall outside the scope of the conventional friability tester a higher-energy input instrument is needed to generate quantifiable changes in surface mass. The Friabimat, as described in Ph. Eur. 2.9.41, has been designed to generate the necessary abrasive forces required to define the friability characteristics of these types of dosage forms.
Vaginal Tablet Tester (VTT)
Using the same sample holder as the SDT 1000 together with a low form beaker and heater/stirrer, Copley’s VTT is a reliable, easy-to-use solution to test tablets disintegration properties of vaginal tablets.
TH3/500
Ideal for use in the production area for a quick check of compression force, the TH3 is a portable and simple-to-use tablet hardness tester.
Using a multi-turn, low-friction hand wheel to apply the load, the TH3/500 can apply a force up to 500 N. The resulting breaking force is displayed clearly on the LCD with a wide choice of data output options.
With no calibration routinely required, this tester offers easy and convenient tablet hardness testing in busy production environments.
Introduction:
YS3020 Color Spectrophotometer with Customized Aperture
YS30 Series grating spectrophotometer adopts bluetooth and USB dual modes for wider use, and with SCI & SCE measurement data, it is compatible with many famous brands. 8mm, 4mm or customized aperture is optional. Special UV light makes YS3060 easy to measure sample with UV and high accuracy and extended function PC software let it be good partner for colorist and color quality control management.
YS3060 UV Grating Spectrophotometer
Full Illuminants + UV, 8mm&4mm Apertures, SCI&SCE, Bluetooth Comm, High Precision.
An Ultrasonic Cleaner quickly and gently removes sample residues from test sieves, without damaging the mesh material.
An ultrasonic cleaner not only increases the lifetime of test sieves, it is especially recommended for small apertures. For reliable results, cleaning is recommended after each analysis.
Product Advantages
Has been specially designed for cleaning test sieves
Suitable for general laboratory use.
Easy to operate and extremely efficient to use
XDJ -400 Plastic beveling cutting machine
Place of Origin: BEIJING, CHINA
Brand Name: JINHAIHU
Certification: ISO9001
Model Number: XDJ -400
Instrument features
1,The introduction of European technology has the characteristics of good cutting effect, high automation degree, complete protection devices, convenient installation and use, beautiful appearance, filling the gap in the domestic industry.
2,Wide range, modular structure, pneumatic clamping, planetary cutting, carbide saw sheet to ensure smooth pipe end surface is conducive to tightening and sealing during pipe pressure test.
3,The cutting depth is easy to adjust, and the cutting chamfer is completed at one time to reduce the labor intensity of workers and improve the work efficiency.
4,After pressing the pipe of the test rotary motor, the pressure frame will stop falling. Cut the cutting motor after lifting the handle and drop the handle motor to automatically stop operation.
5,The electronic soft start function provides the torque required for the instrument to start smoothly, and reduces the electromagnetic impact on the power supply system.
Name:ECT(PAT)Sample Cutter
Model:PN-ECC25
PN-ECC25 type Corrugated Cardboard ECT or PAT Sampling Cutter is to get the required special sampling of Edge Crush tes
Name:Circular Sample Cutter
Model:PN-SC100
Circular Sample Cutter can get a circular sampler. Then sampling equipment can cut the sample size quickly and accurately for sampling of Grammage
eXact™ 2 Portable Spectrophotometer
Identify the exact point of measurement with Mantis™ video targeting.
Intuitive design and 30% larger screen make it easy to learn and use.
Avoid wet ink contamination with low-contact measurement area.
Introduction:
CR9 realizes the two-in-one spectrophotometer and spectrocolorreader, easy to use and not expensive. It is a masterpiece that integrates high precision, high performance, and high cost performance.
The CR9 (Advanced) is a portable spectrophotometer developed by 3nh using its own core technology of spectroscopy. It uses a built-in silicon photodiode array (dual-row 24 groups) sensor, an imported white board, and the repeatability ΔE*ab can be easily controlled within 0.03. CR9's powerful performance configuration and excellent inter-instrument error make color measurement more professional, while also ensuring the consistency of measurement data of multiple devices. The CR9 spectrocolorreader takes into account the measurement speed and the convenience of operation at the same time. The color can be controlled through the PC-side software, and it can also be seamlessly connected to the mobile device through Bluetooth.It greatly expands the application space of the colorimeter, and makes the traditional colorimeter glow with a different application charm.