Mask Elastic Band Tensile Teste
Model: QC-548D2
Cometech - Taiwan
548D2 is a table-top universal testing machine with Cometech's latest 7" TFT D1 controller, which can conduct the test in stand-along mode. D2 controller displays real time data or data in a short period, various units can be chosen based on user’s needs. Users can also run advance analysis with optional D2 software, or out put raw data to csv. Format(Excel format) with flash drive for self analysis.
Industry: Medical Products, Mask
Coefficient of Friction Tester, Motor Coefficient of Friction Tester
Model: QC-117 & QC-117A
Confirm to TAPPI T-815, ASTM D202 Standard
QC-117 & QC-117A Put specimen on the platform, and then put dead weight on the top of specimen according to standard requirement. Let platform angle goes up until the deadweight slides down. Get the tan value from initial slide angle. The tan value represents surface static friction coefficient. Testers also have motor type with angle steadily go up and automatically stop function
Portable Multiparameter Water Quality Meter
Model: AC2000
Trace2o-UK
Essential water quality parameters such as pH, conductivity, TDS, dissolved oxygen and ORP are evaluated to assess water, in terms of suitability for human consumption and to determine wastewater treatment efficiency. Water samples collected for the purpose of quality testing become unstable when removed from source, which means rapid testing is essential for accuracy. On site testing therefore boasts advantages over main laboratory tests where timing is crucial. The solution to this is fully portable and adaptable instruments that return results comparable with laboratory methods, that Environmental engineers can rely on. The AquaCheck Multiparameter Water Quality meter is a high-quality modern test instrument that is intuitive to use, and with a wide range of traditional and ISE sensors available, means the AC2000 has the versatility to suit your testing requirements
Datacolor Spectro Benchtop Spectro Colorimeter
Model: 1000V
P/N: 1030-1642
Manufacturer: Datacolor
Contact for quotation: 0765 259 545
The close tolerance benchtop spectrophotometer is designed with high performance and reliability for color matching and quality control in the Textile, Plastic, Paint and Coating industries, etc.
PN-48AF Automatic Color Tester
Model: PN-48AF
Manufacturer: Pnshar - China
Contact for quote: 0765 259 545
Introduction:
PN-48AF Automatic Color Tester is used to measure the D65 brightness (R457) D65 fluorescence brightness color and color difference opacity/transparency light scattering coefficient light absorption coefficient and ink absorption value of ob jects.
Application:
Paper, pulp, chemical fiber, textile, plastic, ceramic, enamel, etc.
Spectrophotometer Densitometer
Model: YD5010
GBPI - China
1.Perfect combination of the beautiful appearance and the ergonomic structure design;
2.Combined LED light sources with long life and low power consumption, including UV light;
3.Switchable apertures: Φ2/4/8mm, adapt to more samples;
4. Accurately measure reflectance spectrum, CMYK density and Lab value of the sample;
5.High-configuration electronic hardware: 3.5-inch TFT true-color screen, capacitive touch screen, concave grating, 256-pixel dual-array CMOS image sensor, etc.;
6.Two standard observer angles: 2/10, multiple light source modes and color systems;
7.USB mode is widely used.
8.Large-capacity storage space, over 10,000 test data;
9.Especially suitable for process control and quality control of printing plants;10. PC software has powerful function expansion.
Spout Sealing Machine For Slanted Bag
Model: GF2600-X
Brand: GBPI - China
The spout sealing machine is specialized in automatic casing and heat sealing machines for straws and bags, and can be applied to a variety of different types of straws, straws of different calibers and lengths. Applicable to different bag types, stand-up bag, three-side sealing bag, slanted bag, penguin bag. Products are suitable for a variety of industries, beverages, daily chemicals, medicine, food, etc. It has the characteristics of light weight, small footprint, simple operation and stable performance. The main components are all made of aluminum and stainless steel, which meet the environmental and hygienic quality requirements of food and drug GMP
Multifunctions process calibrators
Model: EC 15
Technical data:
- Resistance thermometers (RTD):
Generation and measurement of RTD signals : Pt100, Pt200, Pt500, Pt1000, Cu50
Ω-generator function: 0...4000 Ω
Ω-measurement function: 0...5500 Ω
Accuracy (of reading + const.): ±0.05 %
Selectable temperature unit: °C / °F
Measurement of multi-wire connections: 2 / 3 / 4
- Thermocouples (TC):
Generation and measurement of TC signals: R, S, K, E, J, T, N, B, A, C, D
mV-generator function: -100...1100 mV
mV-measurement function: -50...550 mV
Accuracy (of reading + const.): ±0.05 %
Selectable temperature unit: °C / °F
Internal comparison point: ±0.5 °C
- Voltage (V):
Voltage signal generation : -1...11 V
Voltage signal measurement: -5…55 V
Accuracy (of reading + const.): ±0.05 %
- Technische Daten:
Type : EC 15
- Continuity (O/C)
Continuity measurement : O / C
Switching threshold „open“: 0.5 kΩ
- General data:
Type :EC 15
Sensor connection 4 safety sockets (1 channel) incl. 2 sets
with safety instrument leads (4 mm) and alligator clips
Power supply: 4 x 1.5 V AAA-battery
Operating time approx. 25 h
with auto-power-off
- Operator guidance Keypad:
Display Multifunction display
LCD, 5½ digit, illuminated
- Housing
Version : ABS plastic with protective cover
Dimensions: 210 x 100 x 40 mm (H x W x D)
Weight Approx.: 550 g
Mitutoyo 184-301S Gap Thickness Gauge (0.05-1mm)
Model 184-301S
Manufacturer: Mitutoyo - Japan
Contact: 0765 259 545
Mitutoyo 184-301S thickness gauge is used to measure the gap thickness of devices including 13 leaves, measuring range: 0.05-1mm, leaf length: 150mm is a standard parameter of thickness produced according to modern Japanese technology for the most accurate and reliable in the world. Compactly designed, high precision is used to quickly check the gap between two surfaces of details in technical industries such as construction, mechanical engineering, molds, automobiles, interiors.
High speed capsule Check Weigher with conveyor
Model NO. : CQ-XP400
Trademark: Chaoqiang - China
Features
Function and structure characteristics of check weigher
1. Apply advanced digital signal processing and realize high speed and stable weighing.
2. With liquid crystal and tangibly screen, it is easy to operate.
3. Self-diagnosis function, when Rom/Ram, A/D light electric tube.
4. Belt disassembling without tools, which is easier to clean
5. Automatic stop by sound and light .air blast. or penumatic push rod emergency stop button for safety working condition (according to customers choosing)
6.Solid SUS304 stainless steel structure enable for good performance
The standard for measurement of friction, wear, and lubrication
Wide range of testing parameters, contact geometries, and add-on options
Delivered with the reference sample kit for instrument performance verification
Integrated temperature and humidity sensors
Hach DRB200 Digester
Model: DRB200
Manufacturer: Hach - USA
DRB200 is designed to analyze COD, Total Nitrogen, Total Phosphorus, TOC, ... saving time and ensuring accuracy during testing.
This device is researched to operate on a mechanism that only requires one key to destroy the indicators with the support of Hach reagents. Always the first choice of WASTEWATER TREATMENT PLANT.
Hach DRB200 Digester provides one-key operation. Programs for Hach processes with pre-programmed digestion are included in the device. And it is very fast, the block heats up from 20 to 150°C in less than 10 minutes.
Hach MP-4 Handheld Meter
Model: MP-4
Manufacturer: Hach - USA
The HMP4 is designed for clean water to help sample and test very effectively. The sample cup is integrated on the meter to eliminate the need to use a separate probe and have to hold the sample container at the same time like other types of meters. Ideal for use in spas, swimming pools for water quality control, professional treatment units.