Products

Products

Product portfolio

Short Description: DRK101 Electronic Tensile Testing Machine Product Introduction DRK101 electronic tensile testing machine is a new type of high-precision intelligent testing instrument which is designed and developed according to relevant national standards and adopts modern mechanical design concept and microcomputer processing technology. This series of electronic tensile testing machine and traditional tensile machine The main difference is: exclusive use of the latest aviation aluminum casing, high str...

0765 259 545

Model: AP 500-M6 solution Applications Waste paper management system for jobs (barcode) and bales (RFID) for one or more locations Incoming goods inspection Quality control Detection of moisture accumulations in stacks and waste paper bales Use in bales tracing systems based on RFID

0765 259 545

Your analytical color measurement system to replace visual color assessments Reports CIE/ASTM color values, EP color, USP color, and other color measurement values, meeting EP, USP and other international pharmaceutical guidelines Enables measurement of very small pills, capsules and tablets Built for speed - deliver complete measurement results in as little as two seconds Available with 21 CFR: part 11 electronic records quality control software with full validation

0765 259 545

The latest release after 65 years of manufacturing handheld moisture analyzers for grain, seed, and other agricultural needs, the PM650 provides non-destructive moisture measurement in less than 10 seconds with no sample preparation. Battery powered, the PM650 can be used in the field to optimize harvest, at auctions to assess product quality, and in the receiving area to ensure supplier compliance…before introducing the product into your facility. Simply select the product on the large LCD, pour the grain or seed into the top opening and the moisture value is immediately displayed. Over Over 150 moisture calibrations are included with the PM650. If a custom calibration is needed, contact us!

0765 259 545

Moisture meters for PAPER Model: AD4A Doser

0765 259 545

The emco AP 500-M6 moisture meter is a digital hand-held measuring device for the quick and mobile moisture determination without sampling to detect moisture accumulation in stacks and bales of recovered paper. The meter determines the absolute moisture content of waste paper by simply pressing it on. This moisture content makes it possible to calculate the exact water content of the waste paper delivery. At the same time, complaints about moist bales not only prevents costs but also unpleasant consequences such as rot or generation of heat.

0765 259 545

UTM-2460 Universal Testing Machine Model: UTM-2460 Manufacturer: JJ Test - China Contact for quotation: 0765 259 545 This instrument is applicable to the determination of tensile elastic modulus, flexural elastic modulus, compressive modulus, yield strength, tensile strength, breaking strength, elongation at break, compressive stress, compressive strain, shear, peeling, brace, tear, penetration and other mechanical properties of various thermosetting and thermoplastic plastics. It is applicable to engineering plastics, reinforced nylon, modified plastics, plastic profiles Material analysis and inspection of plastic pipe, plastic sheet, film and other industries.

0765 259 545

Constant Temperature Incubator, E Series Model: ICB-45E Manufacturer: Scitek - China Contact for quote: 0765 259 545 This thermostatic incubator provides precise temperature control and uniformity for a range of routine applications. Microbiology incubators are designed for incubation temperatures above ambient.

0765 259 545

Alveograph Model: AL-T This autograph from Scitek is suitable for all Wheat Flour and is trusted for its Bubble Airflow Velocity and Stirrer Speed reliability. It effectively helps farmers and flour mills evaluate flour characteristics that have a significant impact on the quality and processing characteristics of bread, dough and other pasta products. This Alveograph can greatly improve mill profitability.

0765 259 545

Type C Laboratory Acrylic Vacuum Glove Box Model: MT001-C Building on the features of Type A and Type B glove boxes, the Type C glove box requires control of water and oxygen levels during experiments. This is achieved by using a vacuum pump to extract air from the box and then introducing high-purity, dry inert gas to achieve a low water and oxygen environment inside the box. This model uses acrylic panels with a thickness of 20mm to 30mm and includes a transfer transition chamber.

0765 259 545

VISCOMETER B-ONE PLUS Model: B-ONE PLUS Manufacturer: Lamy Rheology - France Contact for quotation: 0765 259 545 Email: Sales@yktech.com.vn

0765 259 545

Three Roll Mill Model: XD-20-80 Manufacturer: MODERNER - CHINA

0765 259 545

PT-L01A LED Stroboscope Model: PT-L01A Manufacturer: PNTOO - China Contact for quotation: 0765 259 545 Description:1. PT - L01A - DC LED stroboscope is my company with domestic and foreign advanced technology research and development of a new generation of strobe, adopt efficient energy control chip control energy output, makes the energy output is more stable, high brightness and low calorific value; High performance single chip microcomputer processing unit, special display chip drive digital tube display, high frequency accuracy; Adopt the import rotary encoder fast frequency modulation, the built-in high performance lithium battery, the quality is lighter; It does not need AC220V ac power supply, dissolves the trouble caused by the power cord to the operation, can carry on any carry on the observation, use more convenient. A sufficient charge can meet the requirement of single shift production, and the continuous working time is about 4 hours (the specific time is related to the frequency of flash). 2. This stroboscope is especially suitable for situations where the power is not convenient, the voltage is unstable or there is water vapor and other explosion-proof requirements.

0765 259 545

Falling Number Model: FN 8100 Manufacturer: ERKAYA - TURKEY Contact for quote: 0765 259 545 Measures Falling Number and FFN

0765 259 545

LW230 Laboratory glassware washer Product Item:LW230 EURPING - China Heating power:4 kw Cavity volume:223 L LW230 laboratory glassware washer adopts microcomputer chip control technology with 7 inch full color OLED LCD touch screen operating system. A variety of cleaning procedures were setted, including 30 standard procedures(such as fast cleaning、grease、biological、lubricating oil, etc.)and 120 self-defined procedures, in each self-defined procedure, the user can adjust various cleaning parameters such as water source, cleaning temperature, cleaning agent type and addition amount, circulating water pump frequency and save them automatically. Double circulation pump adopts variable frequency soft-start function, avoiding damage to glassware caused by excessive water pressure when the pump is started, the circulating water can be adjusted from 0-600L/min by adjusting the frequency of the water pump during cleaning process. The new back water supply method with two parallel water supply ensure the pressure of each cleaning basket and the spray outlet is uniform.

0765 259 545

LS190 Gloss Meter Model: LS190 Linshang - China LS190 is a handheld gloss meter with a measuring range of 0-200GU. It is professionally used for the surface gloss measurement of paint, coating, ink, plastic, paper, ceramics, stone, metal and other materials. It is easy to use and you can get the measurement results at once after testing under the normal mode. No need to wait. The device can switch the normal mode to QC mode, which can realize quick inspection to improve efficiency. LS190 gloss meter meets the national standard of secondary working machine which means accurate measurement and stable data.

0765 259 545

Inverted microscope Model: IM-7 Optika - Italy/EU IM-7 represents the best of what Optika dedicates to the world of research. This model was created to meet all the needs related to research in life science and designed to be complemented by a series of packages dedicated to more advanced individual applications. For all intents and purposes, IM-7 is to be considered as an inverted imaging platform, due to its high expandability and state-of-the-art quality.

0765 259 545

Digital Soil Moisture pH Meter Model: AMT-300 Manufacturer: Agri Instrument - China Contact for quote: 0765 259 545 Desctription: This 4 in 1 soil moisture, pH, temperature and light tester offers 4 important measurements: pH Value, Temperature, Moisture, and Environment Sunlight Intensity. The sensitive 200mm probe and light sensor window provides 5 units of accurate & precise measured results, pH, moisture, sunlight, °C & °F (soil & environment). In addition to the features, it also has an oversized LCD with clear display, backlight and auto power off. This instrument is a great tool for measuring growing conditions of all kinds of indoor and outdoor plants as well as garden evanescence. A very useful one in lawn care to determine soil conditions in different areas of the garden and finding correct grass seed.

0765 259 545

MS-11C Magnetic Stirrer Model: MS-11C Manufacturer: Gondo ZEDO- Taiwan Features: Low cost, Light weight and Compact Designed in a special shape by ABS housings to resist most harmful chemicals. The speed can be adjusted between 0 to 2000 rpm. Suitable for mixing thin fluid media up to 1000 ml. The height of the clamp can be adjusted easily for holding pH electrode and temperature probe (MS-11C only)

0765 259 545

YT-RRY1000 Softness Tester Model: YT-RRY1000 Brand Name: YANTE - China Product Details The softness tester is a new type of high-precision intelligent testing instrument that is carefully and reasonably designed using modern mechanical design concepts and microcomputer processing technology. It is an ideal experimental equipment for industries and departments such as papermaking, scientific research and quality inspection. Toilet paper, tobacco sheet, fiber fabric, non-woven fabric, cloth, film, etc. ● One-button test, simple and easy to understand. ● Cotex-M4 ARM processor improves the response speed of the instrument, and calculates data accurately and quickly. ● Real-time display of pressure curve. ● Sudden power failure data saving function, the data before power failure is retained after booting and the test can be continued. ● Software and hardware over-range to ensure the safety of sensor use. ● Test data supports USB export. ● The system and screen software both support upgrading via network or USB. ● Support multiple communication methods, online software (purchased separately) can communicate via WIFI or USB. ● Test data supports uploading to cloud server, cooperate with QMS paper quality management system (purchased separately), real-time monitoring of paper inspection data. GB/T8942,QB/T1060

0765 259 545